P15.12-2224-09
2 | Air cleaner housing | T1/1 | Cylinder 1 ignition coil | T1/5 | Cylinder 5 ignition coil | ||
3 | Electrical connectors | T1/2 | Cylinder 2 ignition coil | T1/6 | Cylinder 6 ignition coil | ||
5 | Bolts | T1/3 | Cylinder 3 ignition coil | T1/7 | Cylinder 7 ignition coil | ||
a | Spark plug connector | T1/4 | Cylinder 4 ignition coil | T1/8 | Cylinder 8 ignition coil |
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
Topical note | Notes on avoiding damage to ignition system | ||
| Remove/install | ||
1 | Switch off ignition and store transmitter key outside of transmission range (min. 2 m) | ||
2 | Remove air filter housing (2) on right and left | ||
3 | Remove soundproofing on both cylinder head covers | ||
4 | Release and disconnect electrical connectors (3) from ignition coils (T1/1, T1/2, T1/3, T1/4, T1/5, T1/6, T1/7 and T1/8) | ||
5 | Remove screws/bolts (5) | Screw/bolt, ignition coil to cylinder head cover | |
6 | Pull off and remove the ignition coils (T1/1, T1/2, T1/3, T1/4, T1/5, T1/6, T1/7 and T1/8) including spark plug connectors | Installation: | |
Installation: Discharge approx. Fill 1 g of spark plug connector grease into the spark plug connector (a). | |||
Spark plug connector grease | |||
7 | Check ignition coils (T1/1, T1/2, T1/3, T1/4, T1/5, T1/6, T1/7 and T1/8) and spark plug connectors (a) for damage | If a problem arises | |
| |||
Replace corresponding components. | |||
8 | Install in the reverse order | ||
| Check | ||
9 | Connect diagnostic system; read out fault memory. | Only if required. | |
| |||
Warning | Risk of burn injuries, suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust. Risk of poisoning caused by skin contact with solid components of the exhaust. | Wear protective clothing and safety glasses. Use the extraction system. Move people out of the hazard area. | |
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
10 | Conduct engine test run while checking for proper operation of the engine |
Henviste dokumenter
- ad0000p200004a
- ad0000p200004a
- ah0000p500001a Oplysninger om forebyggelse af skader på grund af snavs og fremmedlegemer
- ah1510p000201v Oplysninger om forebyggelse af skader på tændingssystemet
- ah5400p000101a Oplysninger med henblik på at undgå skader på elektroniske komponenter på grund af elektrostatisk afladning
- ar0910p1150mmi
- as0000z000201a Fare for personskade på hud og øjne ved håndtering af varme eller glødende genstande
- as0000z000501a Fare for ulykke ved automatisk igangsætning når motoren kører. Fare for personskade på grund af knusning og forbrænding, hvis der arbejdes mens motoren startes eller kører
- as0000z003501a Livsfare ved arbejde på komponenter og systemer med U >= 30 V vekselspænding (AC) eller U >= 60 V jævnspænding (DC)
- as4900z000101a Forbrændings-, kvælnings- og forgiftningsfare ved arbejde på udstødningssystemet og dermed forbundne komponenter. Kvælningsfare og fare for forgiftning ved indånding af gasformede og faste komponenter i forbrændingsgassen. Fare for