ar1440w2040c

Remove/install pump module intake filter

Type ar · emne 14.40 · version 0107 · 2011-04-05

Gælder for: ENGINES 900.9 in MODEL 375.1, 970, 972, 975, 976 with CODE (MS4) BlueTec 4 ENGINES 900.9 in MODEL 375.1, 970, 972, 975, 976 with CODE (MS5) BlueTec 5 ENGINES 902.9 in MODEL 375.3, 950.5 /6, 952.5 /6, 953.6, 954.5, 957 with CODE (MS4) BlueTec 4 ENGINES 902.9 in MODEL 375.3, 950.5 /6, 952.5 /6, 953.6, 954.5, 957 with CODE (MS5) BlueTec 5 ENGINES 902.9 in MODEL 375.1, 970, 972, 974, 975, 976 with CODE (MS4) BlueTec 4 ENGINES 902.9 in MODEL 375.1, 970, 972, 974, 975, 976 with CODE (MS5) BlueTec 5 ENGIN

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 14 Udstødningsmanifold, motorbremse, udstødningsrenseanlæg › 14.40 Efterbehandling af udstødningsgas, AdBlue — Serie 375 (modeller 1**, 3**) · Serie 900 (modeller 9**) · Serie 902 (modeller 9**) · Serie 950 (modeller 5**, 6**) · Serie 952 (modeller 5**, 6**) · Serie 953 (modeller 6**) · Serie 954 (modeller 5**) · Serie 957 · Serie 958 (modeller 0**, 2**) · Serie 970 · Serie 972 · Serie 974 · Serie 975 · Serie 976

EinPAS 15 Motor › 15.40 Udstødningssystem/udstødningsefterbehandling › 15.40.51 pumpe/doseringsenhed/dyse — Serie 375 (modeller 1**, 3**) · Serie 900 (modeller 9**) · Serie 902 (modeller 9**) · Serie 950 (modeller 5**, 6**) · Serie 952 (modeller 5**, 6**) · Serie 953 (modeller 6**) · Serie 954 (modeller 5**) · Serie 957 · Serie 958 (modeller 0**, 2**) · Serie 970 · Serie 972 · Serie 974 · Serie 975 · Serie 976

Gælder også for motorer/gearkasser: 924 9**, 925 9**, 926 9**

AR14.40-W-2040C

Remove/install pump module intake filter

22.3.11

ENGINES 900.9 in MODEL 375.1, 970, 972, 975, 976 with CODE (MS4) BlueTec 4

ENGINES 900.9 in MODEL 375.1, 970, 972, 975, 976 with CODE (MS5) BlueTec 5

ENGINES 902.9 in MODEL 375.3, 950.5 /6, 952.5 /6, 953.6, 954.5, 957 with CODE (MS4) BlueTec 4

ENGINES 902.9 in MODEL 375.3, 950.5 /6, 952.5 /6, 953.6, 954.5, 957 with CODE (MS5) BlueTec 5

ENGINES 902.9 in MODEL 375.1, 970, 972, 974, 975, 976 with CODE (MS4) BlueTec 4

ENGINES 902.9 in MODEL 375.1, 970, 972, 974, 975, 976 with CODE (MS5) BlueTec 5

ENGINES 924.9 in MODEL 958.0, 970, 972, 974, 975, 976 with CODE (MS4) BlueTec 4

ENGINES 924.9 in MODEL 958.0, 970, 972, 974, 975, 976 with CODE (MS5) BlueTec 5

ENGINES 925.9 in MODEL 970, 972, 974 with CODE (MS4) BlueTec 4

ENGINES 925.9 in MODEL 970, 972, 974 with CODE (MS5) BlueTec 5

ENGINES 926.9 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5, 957, 958.2 with CODE (MS4) BlueTec 4

ENGINES 926.9 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5, 957, 958.2 with CODE (MS5) BlueTec 5

ENGINES 926.9 in MODEL 958.0 with CODE (MS4) BlueTec 4

ENGINES 926.9 in MODEL 958.0 with CODE (MS5) BlueTec 5

Remove/install pump module intake filter

W14.40-1427-09

1 Housing cover

2 Electrical connector

3 AdBlue line

4 Hose line pack

9 Intake filter

10 Locking piece

11 AdBlue pipe connection

12 filter screen mounting

5 Open end wrench

6 Open end wrench

7 Pump module

8 Sheet metal screw (M440)

Remove/install

Danger!

Risk of burn injuries and scalding when working at AdBlue lines and the components attached to them. Risk of injury to skin and eyes when handling AdBlue. Risk of poisoning caused by swallowing AdBlue

Only pour AdBlue into suitable containers. Wait until the pressure is released before starting any work on the exhaust aftertreatment system.

AS14.40-Z-0001-01A

Notes on use, material properties and handling of AdBlue®

AH14.40-N-0001-01A

1

Switch off ignition

2

Pull off electrical connector (2) from pump module (7)

Protect electrical connector (2) and the electrical connection at pump module (7) from escaping AdBlue solution, using plastic film or similar material.

Electrical connectors (2) and the electrical connection should not be allowed to come in contact with AdBlue, as this can cause damage to the electrical wiring harness and SCR frame module control.

3

Check electrical wiring harness for corrosion

AR14.40-W-2033A

4

Detach AdBlue line (3) from AdBlue inlet pipe connection (11), and close off with plug (10)

Plug (10) must be kept at hand, since AdBlue will flow out immediately when AdBlue line (3) is detached.

Installation: Replace O-rings.

Sealing piece for AdBlue intake line

WF58.50-W-1440-05A

5

Detach housing cover (1)

Only for vehicles with pump module (7), where the counterholding hexagon nut on filter screen support fitting (12) is not outside, but behind housing cover (1).

*BA14.40-N-1047-02C

6

Remove AdBlue inlet pipe connection (11) from filter screen support fitting (12)

To remove AdBlue inlet pipe connection (11), counterhold with an open end wrench (6) on filter screen support fitting (12).

*BA14.40-N-1045-02C

7

Remove intake filter (9) from filter screen support fitting (12)

Intake filter (9) can be removed with a sheet metal screw (8).

Installation: Insert intake filter (9) carefully in filter screen support fitting (12), till the collar is seen to touch intake filter (9).

8

Install in the reverse order

Exhaust aftertreatment, Blue Tec

Number

Designation

Engine
900.9, 902.9, 924.9, 925.9, 926.9 with code MS4 or code MS5

BA14.40-N-1045-02C

AdBlue inlet fitting to filter screen support fitting

Nm

15

BA14.40-N-1047-02C

Pump module housing cover on pump module

Nm

8

Henviste dokumenter