ar1440w2001b

Remove/install injection line for exhaust aftertreatment system

Type ar · emne 14.40 · version 0301 · 2011-03-24

Gælder for: ENGINES 457.9 in MODEL 940, 942, 943, 944 with CODE (MS4) BlueTec 4 ENGINES 457.9 in MODEL 940, 942, 943, 944 with CODE (MS5) BlueTec 5

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 14 Udstødningsmanifold, motorbremse, udstødningsrenseanlæg › 14.40 Efterbehandling af udstødningsgas, AdBlue — Serie 940 · Serie 942 · Serie 943 · Serie 944

EinPAS 15 Motor › 15.40 Udstødningssystem/udstødningsefterbehandling › 15.40.13 ledning/slange/ventil — Serie 940 · Serie 942 · Serie 943 · Serie 944

Gælder også for motorer/gearkasser: 457 9**

AR14.40-W-2001B

Remove/install injection line for exhaust aftertreatment system

22.3.11

ENGINES 457.9 in MODEL 940, 942, 943, 944 with CODE (MS4) BlueTec 4

ENGINES 457.9 in MODEL 940, 942, 943, 944 with CODE (MS5) BlueTec 5

Remove/install injection line for exhaust aftertreatment system

W14.40-1182-06

1 Metering device

2 Injection line

3 Injection nozzle

Modification notes

11.8.08

Value changed: Injection line union nut on injection nozzle

*BA14.40-N-1003-02B

Value changed: Injection line union nut on metering device

*BA14.40-N-1004-02B

Remove/install

Danger!

Risk of burn injuries and scalding when working at AdBlue lines and the components attached to them. Risk of injury to skin and eyes when handling AdBlue. Risk of poisoning caused by swallowing AdBlue

Pour AdBlue into suitable containers only. Wait until the pressure is released before starting any work on the exhaust aftertreatment system.

AS14.40-Z-0001-01A

Notes on use, material properties and handling of AdBlue®

AH14.40-N-0001-01A

1

Open maintenance flap

Danger!

Risk of injury caused by body parts being pinched or crushed as cab is tilted

Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure with the safety strut.

AS60.80-Z-0001-01A

2

Tilt cab

Notes on tilting the cab

AH60.80-N-0003-01A

3

Remove top right soundproofing on frame

4

Remove injection line (2)

Seal holes with a suitable plug.

Installation: Replace injection line (2) after each removal.

*BA14.40-N-1003-02B

*BA14.40-N-1004-02B

5

Install in the reverse order

Exhaust aftertreatment, Blue Tec

Number

Designation

Engine
457.9
with code MS4
or code MS5

BA14.40-N-1003-02B

Union nut, injection line to injection nozzle

Nm

14

BA14.40-N-1004-02B

Union nut, injection line to injection nozzle/injection pump

Nm

14

Henviste dokumenter