Engine | 457 in model 693, 695 |
with code MS5 (Euro V) | |
Engine | 457, 924, 926 in model 693, 694, 695 |
with code MS5 (Euro V) | |
Engine | 460.984 in model 934 |
with code MS5 (BlueTec 5) | |
Engine | 924 in model 979 |
with code MS5 (Euro V) | |
Engine | 924, 926 in model 958 |
with code MS5 (BlueTec 5) | |
Engine | 926 in model 958 |
with code MS5 (BlueTec 5) |
Pump module connection |
1 | Electric terminal (Ø 1.5 mm ELA) |
2 | Sealing seal |
3 | Electrical cable (red/white) |
4 | Electrical cable (brown/white) |
5 | Corrugated tube |
6 | Plug |
7 | Contact socket |
W14.40-1290-04
SCR control unit connection |
3 | Electrical cable (red/white) |
4 | Electrical cable (brown/white) |
5 | Corrugated tube |
8 | Sealing seal |
9 | Electric terminal (MCP 1,5K ELA) |
W14.40-1286-01
1 | Turn off ignition | ||
2 | Insert the electrical cables (3, 4) into the corrugated tube (5) | The new electrical harness with the cables (3, 4) must not be incorporated into the harness of the SCR module between the pump module and the SCR module, it must be fixed next to the latter. | |
3 | Install the connector in the cables (3, 4) for the connection in the pump module |
| |
Crimp the electrical terminals (1) using the crimping pliers. | |||
4 | Install the electrical cables (3, 4) in the electrical terminals (9) for connection in the SCR control unit |
| |
Crimp the electrical terminal fitting contacts (9) with crimping pliers. |