D07.04-1155-08
Shown on model 906 up to facelift |
1 | Diesel particulate filter | B85/2x1 | Oxygen sensor electrical connection | |
B85/2 | Oxygen sensor |
Danger ! | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
| Remove/install | ||
1 | Remove air intake pipe | ||
2 | Disconnect oxygen sensor electrical connection (B85/2x1) at firewall and expose wiring harness | ||
3 | Remove oxygen sensor (B852) from diesel particulate filter (1) and take off | Installation: Coat thread of oxygen sensor (B85/2) with hot lubrication paste. | |
O2 sensor on catalytic converter | |||
Paste, hot lubrication 1 kg, DBL 6879.20 | |||
Box wrench bit | |||
4 | Install in the reverse order | ||
5 | Connect diagnostic system, clear fault memory and perform initialization of oxygen sensor (B85/2) in control unit using a diagnostic system | When replacing the oxygen sensor (B85/2) | |
| |||
Danger ! | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
6 | Perform an engine test run and check exhaust system in the area around the oxygen sensor (B85/2) for leaktightness |
000 589 71 03 00
Box wrench bit
Henviste dokumenter
- ad0000d200004sd
- ar0910d8131we
- as0000z000201a Fare for personskade på hud og øjne ved håndtering af varme eller glødende genstande
- as0000z000501a Fare for ulykke ved automatisk igangsætning når motoren kører. Fare for personskade på grund af knusning og forbrænding, hvis der arbejdes mens motoren startes eller kører