ar1325d3200we

Remove/install poly-V belt tensioning device

Type ar · emne 13.25 · version 0101 · 2011-06-07

Gælder for: ENGINES 651 in MODEL 900 ENGINES 651.955 /956 /957 in MODEL 906

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 13 Kompressor, remtræk › 13.25 Remspændeanordning — Serie 651 · Serie 900 · Serie 906

EinPAS 15 Motor › 15.18 Remtræk › 15.18.30 rem/remskive/spændeanordning/styrerulle — Serie 651 · Serie 900 · Serie 906

AR13.25-D-3200WE

Remove/install poly-V belt tensioning device

23.5.11

ENGINES 651 in MODEL 900

ENGINES 651.955 /956 /957 in MODEL 906

Remove/install poly-V belt tensioning device

D13.25-1105-05

1 Tensioning device

2 Tensioner pulley

3 Bolt

Remove/install

1

Remove engine trim panel

AR01.10-D-2405WE

2

Slacken poly-V belt remove from the tensioner pulley (2) for the clamping device (1).

Installation: Inspect poly-V belt for wear and damage.

See:

AR13.22-D-3902-05WE

Check poly-V belt for wear and damage

AR13.22-S-1351S

3

Remove bolts (3) and take off clamping device (1)

*BA13.25-N-1011-01P

4

Install in the reverse order

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running

Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

5

Perform an engine test run and check poly-V belts for correct running

Belt tensioning device

Number

Designation

Engine
651 in model 900

BA13.25-N-1011-01P

Bolt, poly-V belt tensioning device to major assembly carrier

M8

Nm

20

M10

Nm

45

Belt tensioning device

Number

Designation

Engine
651 in model 906

BA13.25-N-1011-01P

Bolt, poly-V belt tensioning device to major assembly carrier

M8

Nm

20

M10

Nm

45

Henviste dokumenter