Remove/install poly-V belt

AR13.22-S-1202CD

Remove/install poly-V belt

10.12.2018

Model

415 with engine 607, 608

Modification notes

10.12.2018

Method extended

Operation step 7

Shown on removed engine 607 with code H06 (air conditioning system)

1

Poly-V-belt

2

Tensioning device

 Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

 

Remove/install

1

Remove bottom engine compartment paneling.

AR61.20-S-1105C

2

Remove right front section of fender liner.

AR88.10-S-1310C

3

Loosen the poly-V belt (1).

 To do so, move and hold the clamping device (2) on the hexagon in the direction of the arrow.

4

Remove poly-V-belt (1).

 Installation:
Do not kink poly-V belt (1); do not use belt wax or any similar products.
Malfunctions and noises can arise otherwise.

 Installation: Observe routing diagram of poly-V belt (1). Check correct seating of the poly-V belt (1).



Check

5

Check condition of the poly-V-belt (1).

AR13.22-S-1351C

Depending on the findings,



Replace poly-V-belt (1).

6

Install in the reverse order.



Check

 Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

7

Perform an engine test run and check poly-V belts (1) for correct movement.

 Visual inspection only.