ar1322p1202cd
Remove/install poly-V belt
Type ar · emne 13.22 · version 0103 · 2017-12-19
Gælder for: Engine 651 in model 204, 212 (except 212.098/298)
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 1 Motor › 13 Kompressor, remtræk › 13.22 Enkeltremstræk — Serie 204 · Serie 212 (modeller 001, 002, 003, 004, 005, 006, 011, 020, 021, 023, 024, 025, 026, 027, 034, 035, 036, 040, 041, 047, 048, 052, 053, 054, 055, 056, 057, 059, 061, 065, 067, 072, 073, 074, 075, 076, 077, 080, 082, 087, 088, 089, 090, 091, 092, 093, 094, 095, 097, 099, 133, 134, 136, 147, 148, 154, 162, 165, 167, 168, 195, 201, 202, 203, 204, 205, 206, 211, 220, 221, 223, 224, 225, 226, 227, 234, 236, 247, 248, 254, 255, 256, 257, 259, 261, 265, 267, 272, 273, 274, 275, 276, 277, 280, 282, 287, 288, 289, 291, 292, 293, 294, 297, 299) · Serie 651
EinPAS 15 Motor › 15.18 Remtræk › 15.18.30 rem/remskive/spændeanordning/styrerulle — Serie 204 · Serie 212 (modeller 001, 002, 003, 004, 005, 006, 011, 020, 021, 023, 024, 025, 026, 027, 034, 035, 036, 040, 041, 047, 048, 052, 053, 054, 055, 056, 057, 059, 061, 065, 067, 072, 073, 074, 075, 076, 077, 080, 082, 087, 088, 089, 090, 091, 092, 093, 094, 095, 097, 099, 133, 134, 136, 147, 148, 154, 162, 165, 167, 168, 195, 201, 202, 203, 204, 205, 206, 211, 220, 221, 223, 224, 225, 226, 227, 234, 236, 247, 248, 254, 255, 256, 257, 259, 261, 265, 267, 272, 273, 274, 275, 276, 277, 280, 282, 287, 288, 289, 291, 292, 293, 294, 297, 299) · Serie 651
AR13.22-P-1202CD
| Remove/install poly-V belt
| 17.11.2017
|
Engine
| 651 in model 204, 212 (except 212.098/298)
|
1
| Poly-V-belt
|
| 2
| Poly-V belt tensioning device
|
| 3
| Cover holder
|
| Remove
|
|
|
Warning
| Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities.
| No parts of the body or limbs should be within the operating area of mechanical components when moving components.
| AS00.00-Z-0009-01A
|
1
| Remove intake air duct upstream of air filter housing
|
|
|
2
| Remove pulley and belt guard
|
|
|
3
| Remove cover holder (3)
|
|
|
4
| Loosen poly-V belt (1)
|
| AR13.22-P-3902-01T
|
| Pin for locking poly-V belt tensioning device
|
| WF58.50-P-1325-02A
|
5
| Remove poly-V-belt (1)
| When carrying out further operations on the engine or timing case cover, relieve poly-V belt tensioning device (2).
|
|
|
|
| Check belt pulley profile and poly-V belt tensioning device (2) for damage and soiling and replace or clean if necessary.
|
|
| Check
|
|
|
6
| Check poly-V belt (1) for wear
|
|
|
|
|
| AP13.22-P-1352CW
|
| Install
|
|
|
7
| Fit on poly V-belt (1)
|
Do not use belt wax or similar products.
This leads to slipping of the poly-V belt (1).
|
|
|
|
| Lay on poly-V belt (1) beginning at the poly-V belt tensioning device (2), see:. Observe the routing diagram.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Routing diagram of poly-V belt
| AR13.22-P-3902-02CD
|
8
| Tension poly-V belt (1)
|
| AR13.22-P-3902-04T
|
9
| Mount cover holder (3)
|
|
|
10
| Attach pulley and belt guard
|
|
|
11
| Attach intake air duct upstream of air filter housing
|
|
|
Henviste dokumenter
