AR09.41-W-2007J | Remove/install boost pressure/charge air temperature sensor | 3.11.11 |
ENGINES 900.9 in MODELS 375.1, 970, 972, 975, 976
ENGINES 902.9 in MODEL 375.3, 950.5 /6, 952.5 /6, 953.6, 954.5
ENGINES 902.9 in MODEL 957 except CODE (MS8) Natural gas engine
ENGINES 902.9 in MODELS 375.1, 970, 972, 974, 975, 976
ENGINES 924.9 in MODELS 958.0, 970, 972, 974, 975, 976
ENGINES 925.9 in MODELS 970, 972, 974
ENGINES 926.9 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5, 957, 958.2
ENGINES 926.9 in MODEL 958.0
W09.41-1038-08
Shown on engine 900.9 with code (MS4) BlueTec 4
1 Electrical connector
2 Cap
B111 Charge air temperature and boost pressure combination sensor
3 Charge air manifold
| Remove/install | ||
1 | Switch off ignition | ||
Danger! | Risk of injury caused by body parts being pinched or crushed as cab is tilted | Ensure that no one is within tilting range of cab as it is being tilted. Always tilt cab all the way to end position and secure with safety strut. | |
2 | Tilt cab | ||
| Notes on tilting the cab | ||
3 | Take off cover (2) at charge air manifold (3) | ||
4 | Disconnect electrical connector (1) | ||
5 | Remove charge air temperature and boost pressure combination sensor (B111) | Installation: Clean sealing surfaces. | |
| |||
6 | Install in the reverse order |
Charge air pipe/charge air cooling
Number | Designation | Engine | Engine | Engine | |
BA09.41-N-1008-01B | Bolt, charge air temperature and charge pressure combination sensor to charge air manifold | Nm | 10 | 10 | 10 |
Charge air pipe/charge air cooling
Henviste dokumenter
- ah6080n000301a Oplysninger om tipning af førerhus
- as6080z000101a Fare for personskade ved fastklemning og knusning, når førerhuset tippes