ar0941s8625pd

Remove/install charge air hose downstream of the charge air cooler

Type ar · emne 09.41 · version 0100 · 2017-01-13

Gælder for: Model 470, 471 with engine 699

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 09 Luftindsugning, luftladning › 09.41 Ladeluftrør/ladeluftkøling — Serie 470 · Serie 471

EinPAS 15 Motor › 15.30 Luftindsugning/opladning › 15.30.32 ledning/slange/ventil — Serie 470 · Serie 471

Gælder også for motorer/gearkasser: 699 ***

AR09.41-S-8625PD

Remove/install charge air hose downstream of the charge air cooler

19.12.2016

Model

470, 471 with engine 699

Remove/install charge air hose downstream of the charge air cooler

S09.41-4629-09

1

Charge air hose

2

Lower connector

3

Clamp

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Remove/install

1

Loosen clamp (3)

Installation: Check clamp (3).

Clamp, charge air hose to charge air pipe upstream of throttle valve actuator

*BA09.41-N-1002-01PD

Depending on findings

Replace clamp (3).

2

Remove lower connector (2)

AR09.41-D-1311-01WE

3

Remove charge air hose (1)

4

Install in the reverse order

Check

Danger !

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

5

Check for leaktightness with engine running

Visual inspection only.

Charge air pipe, charge air hose, throttle valve actuator, charge air distributor, boost pressure sensor

Number

Designation

Model 470, 471 with engine 699

BA09.41-N-1002-01PD

Clamp, charge air hose to charge air pipe upstream of throttle valve actuator

Nm

7

Henviste dokumenter