ar0941s8621ef

Remove/install charge air hose upstream of charge air cooler

Type ar · emne 09.41 · version 0100 · 2014-08-18

Gælder for: MODEL 447 with ENGINE 622

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 09 Luftindsugning, luftladning › 09.41 Ladeluftrør/ladeluftkøling — Serie 447 · Serie 622

EinPAS 15 Motor › 15.30 Luftindsugning/opladning › 15.30.32 ledning/slange/ventil — Serie 447 · Serie 622

AR09.41-S-8621EF

Remove/install charge air hose upstream of charge air cooler

15.07.2014

MODEL

447 with ENGINE 622

Remove/install charge air hose upstream of charge air cooler

1

Charge air hose

2

Charge air pipe

3

Clamp

S09.41-4578-06

Remove/install

1

Remove air filter housing

AR09.10-S-1150EF

2

Remove charge air hose (1) from charge air pipe (2)

To do this open clamp (3).

Installation: Check clamp (3) and replace if necessary.

3

Remove charge air hose (1) at charge air cooler

AR09.41-D-1311-01WE

4

Remove charge air hose (1)

5

Install in the reverse order

Check

Danger !

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

6

Check for leaktightness with engine running

Visual inspection only.

Henviste dokumenter