ar0941s6817pd

Remove/install charge air cooler

Type ar · emne 09.41 · version 0300 · 2019-09-30

Gælder for: Model 470, 471 with engine 699

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 09 Luftindsugning, luftladning › 09.41 Ladeluftrør/ladeluftkøling — Serie 470 · Serie 471

EinPAS 15 Motor › 15.30 Luftindsugning/opladning › 15.30.45 Ladeluftkøler — Serie 470 · Serie 471

Gælder også for motorer/gearkasser: 699 ***

AR09.41-S-6817PD

Remove/install charge air cooler

13.09.2019

Model

470, 471 with engine 699

Modification notes

12.09.2019

Method extended

Operation step 6

Remove/install charge air cooler

S09.41-A002-09

1

Charge air cooler

3

Screw

5

Air duct segment

2

Bolts

4

Air duct segments

Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Remove/install

1

Remove front engine compartment lining at bottom.

AR61.20-S-1105P

Installation: Only install front engine compartment paneling after a leak test.

2

Remove charge air hose upstream of charge air cooler (1).

AR09.41-S-8621PD

Remove charge air hose only from charge air cooler (1).

3

Remove charge air hose downstream of charge air cooler (1).

AR09.41-S-8625PD

Remove charge air hose only from charge air cooler (1).

4

Remove bolt (3) .

5

Remove the charge air cooler (1).

Note on calculation of tightening torque when using insertion or socket tools with various effective lengths

AH00.00-P-0015-01CW

To do this, remove screws (2).

Commercially available devices/tools
Open end wrench bit 13 mm

Screw/bolt, charge air cooler bracket to longitudinal member

*BA09.41-N-1001-03PD

6

Change air duct segments (4, 5).

If the charge air cooler (1) is replaced.

7

Install in the reverse order.

Check

Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

8

Check for leaktightness when engine is running.

Visual inspection only.

Charge air cooler

Number

Designation

Model 470, 471 with engine 699

BA09.41-N-1001-03PD

Screw/bolt, charge air cooler bracket to longitudinal member

Nm

30

Henviste dokumenter