Remove/install pressure transducer for wastegate aneroid capsule

AR09.40-S-1005PD

Remove/install pressure transducer for wastegate aneroid capsule

28.08.2019

Model

470, 471 with engine 699

except code MT2 (Emissions class Euro 6d-TEMP N1 GR.III/N2)

Shown on model 470 with engine 699.301

1

Pressure transducer

2

Electrical connector

5

Bolts

7

Vacuum hoses

9

Vacuum hoses (model 470, 471 with engine 699.301)

 

Remove/install

1

Remove engine cover.

AR01.10-S-2405PD

2

Remove air filter housing.

AR09.10-S-1150PD

3

Remove air intake hose.

AR09.10-S-8030PD

4

Remove the fan.

AR20.40-S-5614PD

5

Disconnect electrical connection (2).

6

Remove vacuum hoses (7).

 Removal: Mark assignment of vacuum hoses (7).

 Installation: Ensure correct assignment of vacuum hoses (7).

 Installation: Check vacuum hoses (7).

If necessary,



Replace vacuum hoses (7).

7

Remove vacuum hoses (9).

Model 470, 471 with engine 699.301
except code MT2 (Emissions class Euro 6d-TEMP N1 GR.III/N2)

 Installation: Check retaining clips for damage.

If necessary,



Replace damaged retaining clips.

8

Remove pressure transducer (1).

 To do this, remove the screw/bolts (5).

 M6

*BA00.10-N-1002-01A

9

Install in the reverse order.

 Headless screws/bolts: screws/bolts and nuts, coarse-pitch thread

Number

Designation

8.8

10.9

BA00.10-N-1002-01A

M6

Galvanized

Nm

9

13

Phosphated

Nm

9

12

 Headless screws/bolts: screws/bolts and nuts, coarse-pitch thread

Number

Designation

12.9

BA00.10-N-1002-01A

M6

Galvanized

Nm

16

Phosphated

Nm

14