Remove/install oil feed line for turbocharger

AR09.40-P-6022OLM

Remove/install oil feed line for turbocharger

05.08.2020

Engine

654.9 in model 167

with code M014 (Engine uprated)

1

Oil feed line

5

Vacuum line

8

Screw

2

Screw

6

Screw

9

Timing case cover

3

Turbocharger

7

Vacuum hose

10

Bypass flap controller

4

Screw

 Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

 Caution

Risk of injury to skin and eyes due to handling of engine oil. Risk of poisoning caused by swallowing engine oil

Wear protective gloves, protective clothing and safety glasses.
Do not fill engine oil into beverage containers.

AS18.00-Z-0001-01A

 Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Topical note

Notes on threaded connections fastened using a tightening angle-based tightening process

AH00.00-P-0020-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

 

Remove/install

1

Remove diesel particulate filter.

AR49.20-P-1200OLM

2

Remove the air duct housing.

AR09.20-P-0080OLM

3

Remove screws (2).

 Screw/nut, exhaust gas turbocharger oil lines

*BA09.40-P-1018-02B

4

Unscrew bolt (4).

 Screw/nut, exhaust gas turbocharger oil lines

*BA09.40-P-1018-02B

5

Detach vacuum line (5) from bypass flap controller (10) and seal openings with suitable stop plugs.

 Record plug

*129589009100

6

Remove screw (6).

 Screw/nut, exhaust gas turbocharger oil lines

*BA09.40-P-1018-02B

7

Detach vacuum hose (7) from vacuum line (5) and seal openings with suitable stop plugs.

 Record plug

*129589009100

8

Remove screw (8).

 Screw/nut, exhaust gas turbocharger oil lines

*BA09.40-P-1018-02B

9

Remove oil feed line (1) from exhaust gas turbocharger (3) and on timing case cover (9) and remove with vacuum line (5).

 Installation: Install new sealing rings.

 Assembly tool

*000589936300

10

Clean openings with a lint-free rag and seal with suitable stop plugs.

 Record plug

*129589009100

11

Install in the reverse order.

12

Check and correct engine oil level.



AP18.00-P-1812SKI

 Turbocharger

Number

Designation

Engine 654 in model all
with code M014 (Engine uprated)

BA09.40-P-1018-02B

Screw/nut, exhaust gas turbocharger oil lines

Stage 1

Nm

8

Stage 2

°

30