Remove/install oil return line for left turbocharger

AR09.40-P-0004MND

Remove/install oil return line for left turbocharger

21.11.2016

Engine

276.8 in model 213, 238

Shown on engine 276.823

1

Bolts

2

Oil return line

3

Screw

 Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

 Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

 Caution

Risk of injury to skin and eyes due to handling of engine oil. Risk of poisoning caused by swallowing engine oil

Wear protective gloves, protective clothing and safety glasses.
Do not fill engine oil into beverage containers.

AS18.00-Z-0001-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

 

Remove/install

1

Remove left ATL

AR09.40-P-6037MND

2

Remove screw/bolt (1)

 Bolt, oil return flow line to turbocharger

*BA09.40-P-1006-01W

3

Detach upper oil return line (2) at ATL and close off openings with suitable stop plugs

 Installation: Replace seal.

 Record plug

*129589009100

4

Remove A/C compressor and lay on front axle carrier

Engine 276 in model 238

AR83.55-P-5310LWL

Engine 276.8 in model 213

AR83.55-P-5310ELA

5

Remove screw/bolt (3) and remove lower part of oil return line (2) and close off openings using suitable stop plugs

 Installation: Replace sealing ring.

 Bolt, oil return line to crankcase

*BA09.40-P-1007-01W

 Record plug

*129589009100

6

Install in the reverse order

 Turbocharger

Number

Designation

Engine 276.8

BA09.40-P-1006-01W

Bolt, oil return flow line to turbocharger

Nm

11

 Turbocharger

Number

Designation

Engine 276.8

BA09.40-P-1007-01W

Bolt, oil return line to crankcase

Nm

9