ar0910s1050ea

Remove/install air filter

Type ar · emne 09.10 · version 0100 · 2019-01-07

Gælder for: Engine 654.9 in model 447

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 09 Luftindsugning, luftladning › 09.10 Luftfilter — Serie 447 · Serie 654 (modeller 9**)

EinPAS 15 Motor › 15.30 Luftindsugning/opladning › 15.30.40 luftfilter/luftfilterkasse — Serie 447 · Serie 654 (modeller 9**)

AR09.10-S-1050EA

Remove/install air filter

21.12.2018

Engine

654.9 in model 447

Remove/install air filter

S09.10-A005-79

Shown with removed engine cover

1

Air filter

3

Cover

5

Vent line

2

Bracket

4

Air cleaner housing

6

Coolant expansion reservoir

Warning

Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant.

Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers.
Wear protective gloves, protective clothing and safety glasses.

AS20.00-Z-0001-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Remove/install

1

Remove bleed line (5) from coolant expansion reservoir (6) and place to one side.

AR20.20-P-7441-01RQ

WIS Service Media
wsm://04_ 201800_55
Operation steps 1 to 3 are shown.

2

Remove cover (3).

3

Pull air filter (1) with bracket (2) out of the air filter housing (4).

4

Remove air filter (1) from the bracket (2).

Installation: Observe installation position of the air filter (1) in the bracket (2).

5

Install in the reverse order

Henviste dokumenter