Remove/install air filter housing

AR09.10-P-1150LA

30.10.08

ENGINES 275 in MODEL 215, 216, 220, 221

ENGINES 275 in MODEL 230 except CODE (P99) Special model "AMG Black Series"

P09.10-2068-06

Illustrated on model 220.176

1 Air intake pipe, left side

2 Air intake pipe, right side

3 Air intake pipe, right side

4 Air intake pipe, left side

4/1 Intake manifold

5 Bolts

6 Bolts

7 Crankcase ventilation hose

8 Pneumatic line

B28/4 Pressure sensor downstream of air filter, left cylinder bank

B28/5 Pressure sensor downstream of air filter, right cylinder bank

 	Remove/install
1	Remove engine cover.	Engine 275.95	AR01.10-P-2405LA
		Engine 275.98	AR01.10-P-2405IM
2	Disconnect electrical connector at pressure sensor downstream of air filter, left cylinder bank (B28/4) and at pressure sensor downstream of air filter, right cylinder bank (B28/5)
3	Remove screws (5) and screws (6)		*BA09.10-P-1001-01E
4	Lift air filter housing, right side (3) and pull back and out of air intake pipe, right side (2)
5	Unclip pneumatic line (8) on left air filter housing (4)
6	Disconnect pneumatic line (8)
7	Lift air filter housing, left side (4) and pull back and out of air intake pipe, left side (1)	 Observe crankcase ventilation system (7) hose.  Installation: Ensure that crankcase ventilation system (7) hose is put on intake manifold (4/1).
8	Install in the reverse order

 Air filter

Number	Designation		Engines 275, 285.950


BA09.10-P-1001-01E	Bolt, air filter housing to bracket	Nm	8