Remove air filter, install

AR09.10-P-1050AK

22.3.07

ENGINE 266.920 /940 /960 /980 in MODEL 169.0 /3, 245.2

P09.10-2104-08

Shown on model 169.0 with Engine 266.920

1 Bolts

2 Air filter housing

X26/31 Engine/engine compartment connector

3 Guide pin

4 Sealing ring

 	Remove/Install
1	Remove the ME-SFI [ME] control unit	 Do not disconnect the electrical connector at the ME-SFI [ME] control unit; place the ME-SFI [ME] control unit to the side.	AR07.08-P-1000AK
2	Remove air intake pipe		AR09.10-P-8131AK
3	Rotate the engine/engine compartment connector (X26/31) to loosen it from the air filter housing (2)
4	Remove bolts (1)		*BA09.10-P-1001-01G
			*BA09.10-P-1002-01G
5	Loosen the air filter housing(2) by tilting to the side and remove,.	 Installation: Check the sealing ring (4) for damage; replace if necessary. Clean the air filter housing (2) with rags. Ensure that the pilot stud (3) is seated correctly in the rubber mount.
6	Install in the reverse order

 Air filter, air duct

Number	Designation		Engine 266


BA09.10-P-1001-01G	Bolt of air filter to intake manifold	Nm	10
BA09.10-P-1002-01G	Bolt, air filter to charge air distribution pipe	Nm	10