P07.17-2060-09
1 | Engine cover | 3 | Electrical connection | 5 | Bracket | ||
2 | Vacuum hoses | 4 | Nuts | Y77/1 | Boost pressure control pressure transducer |
| Notes on avoiding damage through contamination and foreign objects | ||
| Remove/install | ||
1 | Remove engine cover (1) | ||
2 | Detach vacuum hose (2) from boost pressure control pressure transducer (Y77/1) | To avoid swapping of the vacuum hoses (2), mark vacuum hoses (2) relative to the respective connections if necessary. | |
3 | Detach electrical connection (3) from boost pressure control pressure transducer (Y77/1) and set aside | ||
4 | Unscrew nuts (4) and take off boost pressure control pressure transducer (Y77/1) from bracket (5) | ||
5 | Install in the reverse order | ||
6 | Read out fault memory using the diagnostic system and clear if necessary | ||
|
Henviste dokumenter
- ad0000p200004a
- ad0000p200004a
- ah0000p500001a Oplysninger om forebyggelse af skader på grund af snavs og fremmedlegemer