AR07.15-W-9235A | Remove/install MR/PLD injection lines | 19.9.06 |
ENGINE 904.9 in MODEL 668, 670
ENGINE 904.9 in MODEL 374, 375, 673, 674, 676, 958, 970, 972, 975, 976
ENGINE 906.9 in MODEL 374, 958, 970, 972, 974, 975, 976
ENGINE 906.9 in MODEL 374, 375, 950, 952, 953, 954, 958
ENGINE 906.9 in MODEL 957 except CODE (MS8) Natural gas engine
W07.15-0085-12
Shown on engine 904.9
1 Engine trim panel
2 Injection lines
Modification notes
26.4.01 | Value changed from 25 Nm to 35 Nm | Figure in BA07.15-N-1004-01A for engine 904.9, 906.9 modified |
| Removing | ||
Danger! | Risk of injury caused by body parts being pinched or crushed as cab is tilted | Ensure that no one is within tilting range of the cab as it is being tilted. Always tilt cab all the way to the end position and secure with the safety strut. | |
1.1 | Tilt cab | Model 374, 375, 673, 674, 676, 950, 952, 953, 954, 957, 958, 970, 972, 974, 975, 976 | |
| Notes on tilting the cab | ||
1.2 | Remove service cover | Model 668, 670 | |
2 | Remove side soundproofing on the left | Only for model 374, 375, 673, 674, 676, 950, 952, 953, 954, 957, 958, 970, 972, 974, 975, 976. | |
3 | Remove engine panel (1) | ||
Danger! | Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel and risk of injury to eyes and skin caused by contact with fuel | No fire, sparks, open flames or smoking. Wear protective clothing when handling fuel. | |
4 | Remove injection line (2) | | |
| |||
| Install | ||
Danger! | Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel and risk of injury to eyes and skin caused by contact with fuel | No fire, sparks, open flames or smoking. Wear protective clothing when handling fuel. | |
5 | Install injection lines (2) | Do not bend injection lines (2); note installation position. | |
| |||
| |||
| |||
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running | Secure vehicle to prevent it from moving by itself. | |
6 | Start the engine and bleed the fuel system | The fuel system is bled automatically. Allow engine to run for about 1 minute; repeat starting procedure after 2 minutes if the engine stops or does not start. | |
7 | Turn off engine | ||
8 | Check injection lines (2) for leaks by means of a visual inspection | Also replace corresponding injection line (2) if necessary. | |
9 | Install engine panel (1) | ||
10 | Remove side soundproofing on the left | Only for model 374, 375, 673, 674, 676, 950, 952, 953, 954, 957, 958, 970, 972, 974, 975, 976. | |
Danger! | Risk of injury caused by body parts being pinched or crushed as cab is tilted | Ensure that no one is within tilting range of the cab as it is being tilted. Always tilt cab all the way to the end position and secure with the safety strut. | |
11.1 | Lower cab | Model 374, 375, 673, 674, 676, 950, 952, 953, 954, 957, 958, 970, 972, 974, 975, 976 | |
| Notes on tilting the cab | ||
11.2 | Install service cover | Model 668, 670 |
Diesel injection system with unit pumps (MR/PLD)
Number | Designation | Engine Engine | ||
BA07.15-N-1004-01A | Injection line to pressure pipe connection and unit pump | Nm | 35 | |
000 589 68 03 00
Box wrench bit
Ring wrench
000 589 07 03 00
Henviste dokumenter
- ah6080n000301a Oplysninger om tipning af førerhus
- as0000z000501a Fare for ulykke ved automatisk igangsætning når motoren kører. Fare for personskade på grund af knusning og forbrænding, hvis der arbejdes mens motoren startes eller kører
- as4700z000101a Fare for eksplosion ved tænding, fare for forgiftning ved indånding og indtagelse af brændstof samt fare for hud- og øjenskader ved kontakt med brændstof
- as6080z000101a Fare for personskade ved fastklemning og knusning, når førerhuset tippes