Remove/install MR/PLD injection lines · ar0715i9235b · Mercedes-Benz WIS

AR07.15-I-9235B

Remove/install MR/PLD injection lines

22.3.07

ENGINE 904.941 in MODEL 684.482

W07.15-0085-12

1 Engine trim panel

2 Injection line

Modification notes

26.4.01

Value changed from 25 Nm to 35 Nm

Figure in BA07.15-N-1004-01A for engine 904.9, 906.9 modified

	Removing
Danger!	Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel and risk of injury to eyes and skin caused by contact with fuel	No fire, sparks, open flames or smoking. Only pour fuels into suitable and appropriately marked containers. Wear protective clothing when handling fuel.	AS47.00-Z-0001-01A
1	Remove engine panel (1)
2	Remove injection line (2)	 Injection lines (2) must not be bent.
			*000589070300
			*000589680300
	Install
3	Install injection lines (2)	 The injection lines (2) must not be bent and the installation position is to be observed.
			*000589070300
			*000589680300
			*BA07.15-N-1004-01A
 Danger!	Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running	Secure vehicle to prevent it from moving by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.	AS00.00-Z-0005-01A
4	Bleed fuel system	 To do this allow engine to run for about a minute and then stop it. The fuel system purges itself automatically while the engine runs. Crank engine with starter for maximum 90 seconds. Possibly wait at least for about 2 minutes before repeating attempt at starting.
5	Check injection lines (2) for leaks by means of a visual inspection	 In cases of leaks replace the injection lines (2) involved.
6	Install engine panel (1)

 Diesel injection system with unit pumps (MR/PLD)

Number	Designation		Engine 904.9 Engine 906.9 without code MS8


BA07.15-N-1004-01A	Injection line to pressure pipe connection and unit pump	Nm	35

000 589 68 03 00

Box wrench bit

Ring wrench

000 589 07 03 00

as0000z000501a Fare for ulykke ved automatisk igangsætning når motoren kører. Fare for personskade på grund af knusning og forbrænding, hvis der arbejdes mens motoren startes eller kører
as4700z000101a Fare for eksplosion ved tænding, fare for forgiftning ved indånding og indtagelse af brændstof samt fare for hud- og øjenskader ved kontakt med brændstof