AR07.07-P-1454AG | Remove/install hot film mass air flow sensor together with air intake pipe | 5.5.09 |
ENGINE 112.945, 113.962 /982 in MODEL 463
ENGINE 113.980 in MODEL 210.074 /274
ENGINE 113.944 in MODEL 202.033 /093
ENGINE 112.923 /943, 113.961 in MODEL 129
ENGINE 113.943 in MODEL 208.370 /470
ENGINE 113.984 in MODEL 208.374 /474
ENGINE 112.947 in MODEL 170.465
P07.61-0612-06
Shown on Engine 112
1 Engine cover with integral air cleaner
2 Plug of hot film mass air flow sensor
3 Crankcase vent line
4 Air intake tube
B2/5 Hot film mass air flow sensor
| Remove, Install | ||
1 | Remove engine cover with integral air cleaner (1). | Remove by pulling straight up from valve cover. | |
2 | Unplug connector (2) of hot film mass air flow sensor (B2/5) | ||
3 | Detach crankcase ventilation line (3) | ||
4 | Release crankcase ventilation line on right at hot film mass air flow sensor (B2/5) | ||
5 | Open catch of hot film mass air flow sensor (B2/5) with a screwdriver | ||
6 | Push down catch of air intake pipe (4) at electronic accelerator actuator and remove air intake pipe (4) together with hot film mass air flow sensor (B2/5) | Do not damage catch. | |
7 | Detach hot film mass air flow sensor (B2/5) from air intake pipe (4) | Push back retaining clip with a screwdriver. | |
| |||
8 | Inspect seals of air intake pipe (4) and of hot film mass air flow sensor (B2/5), replace if necessary | ||
9 | Install in the reverse order |