ar0704p0005old

Remove/install diesel particulate filter temperature sensor

Type ar · emne 07.04 · version 0102 · 2015-09-16

Gælder for: Engine 651 in model 205, 253

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 07 Blandingstilberedning › 07.04 Følere, sensorer — Serie 205 · Serie 253 · Serie 651

EinPAS 15 Motor › 15.40 Udstødningssystem/udstødningsefterbehandling › 15.40.12 Sensor/kontakt/ledningssæt — Serie 205 · Serie 253 · Serie 651

AR07.04-P-0005OLD

Remove/install diesel particulate filter temperature sensor

2.9.15

Engine

651 in model 205, 253

Remove/install diesel particulate filter temperature sensor

P07.04-2795-08

Shown on vehicle without code M005 (4MATIC)

1

Electrical connection

B19/9

Temperature sensor upstream of diesel particulate filter

Remove/install diesel particulate filter temperature sensor

P07.04-2813-09

Shown on vehicle with code M005 (4MATIC)

2

Differential pressure sensor (DPF)

B19/9

Temperature sensor upstream of diesel particulate filter

3

Air filter housing bracket

Danger !

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Remove rear section of lower engine compartment paneling

AR61.20-P-1105LW

2

Remove air filter housing


Engine 651 in model 205, 253
with code M005 (4MATIC)

AR09.10-P-1150OLD

3

Disconnect electrical connection of DPF differential pressure sensor (2)

Engine 651 in model 205, 253
with code M005 (4MATIC)

4

Detach rear bracket for air filter housing (3) with DPF differential pressure sensor (2) to one side

Engine 651 in model 205, 253
with code M005 (4MATIC)

5.1

Disconnect electrical connection (1) and detach from bracket at oil pan

For vehicles with CAT-DPF device.

5.2

Disconnect electrical connection for temperature sensor upstream of diesel particulate filter (B19/9)

For vehicles with CAT.

The electrical connection of the temperature sensor upstream of diesel particulate filter (B19/9) is fastened to the right rear engine suspension lug.

6

Loosen electrical line for temperature sensor upstream of diesel particulate filter (B19/9) from clamps

7

Remove temperature sensor upstream of diesel particulate filter (B19/9)

Installation: Coat thread of connection with heat-resistant lubricant.

Union nut, temperature sensor upstream of diesel particulate filter

*BA07.04-P-1006-01L

Paste, hot lubrication 1 kg, DBL 6879.20

*BR00.45-Z-1005-06A

8

Install in the reverse order

Check

Danger !

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

9

Check leaktightness of exhaust system when engine is running

Sensors, transmitters

Number

Designation

Engine 651

BA07.04-P-1006-01L

Union nut, temperature sensor upstream of diesel particulate filter

Nm

45

Repair materials

Number

Designation

Order number

BR00.45-Z-1005-06A

Paste, hot lubrication 1 kg, DBL 6879.20

A 000 989 76 51

Henviste dokumenter