ar0703t671202b

Checking spray jet pattern and chatter characteristics of injection nozzle

Type ar · emne 07.03 · version 0103 · 2012-05-30

Gælder for: ENGINE 441.9 in MODEL 613.355/364/365 ENGINE 402.970, 446.938 in MODEL 613.455/485

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 07 Blandingstilberedning › 07.03 Indsprøjtningsdyser, indsprøjtningsventiler, ledninger — Serie 441 (modeller 9**) · Serie 613 (modeller 355, 364, 365, 455, 485)

EinPAS 15 Motor › 15.45 Motorstyring › 15.45.42 brændstoffordeler/rail/dyse/injektor — Serie 441 (modeller 9**) · Serie 613 (modeller 355, 364, 365, 455, 485)

Gælder også for motorer/gearkasser: 402 970, 446 938

AR07.03-T-6712-02B

Checking spray jet pattern and chatter characteristics of injection nozzle

Danger !

Risk of explosion caused by test oil being ignited. Risk of injury to skin and eyes caused by test oil streaming out

Keep all ignition sources out of the hazard area. Only check injection nozzles in the nozzle testing device. Do not touch the injection nozzle stream.

AS07.03-Z-0001-01A

ENGINE

441.9 in MODEL 613.355/364/365

ENGINE

402.970, 446.938 in MODEL 613.455/485

Checking spray jet pattern and chatter characteristics of injection nozzle

000 589 14 27 00

Tester

Chatter:

A significant audible buzzing noise during the injection process dependent on the version which made by the nozzle needle which is caused to vibrate. An easy to hear buzzing noise should be established for more rapid or slower actuation of the lever. Periods of no buzzing can occur for short time.

Spray pattern:

An injection jet with a high degree of atomization should be established also for slower actuation of the lever. There must be an unatomized solid jet in a chatterless range. The injection jet must be completely atomized for rapid actuation of the lever.

Henviste dokumenter