Remove/install leak oil line to injectors

AR07.03-P-9105CD

Remove/install leak oil line to injectors

23.4.12

 Danger!

Risk of explosion caused by fuel igniting. Risk of injury to skin and eyes caused by fuel spraying out at high pressure

Keep all ignition sources out of hazard area.

Do not carry out any work on systems when they are under pressure

AS07.16-Z-0001-01A



Notes on injectors

AH07.16-P-1000-01A



Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A



Notes about Common-Rail components

AH07.16-P-0002-01TX



Removing

1

Remove cylinder head cover trim

2

Remove connectors for leak oil line (1) on the fuel injectors (Y76/1, Y76/2, Y76/3, Y76/4)

3

Cut through leak oil line (1)

 The connecting point on the leak oil line (1) must be located 1 cm in front of the white marking (2) so that there is still 1 cm of line at the end still remaining in the vehicle in front of the white marking (2).



Install

4

Connect leak oil line repair solution (4) with the leak oil line (1) remaining in the vehicle

 The connection fitting (3) is located on the leak oil line repair solution (4).

5

Attach connectors for leak oil line (1) to the fuel injectors (Y76/1, Y76/2, Y76/3, Y76/4)

 Coat the O-rings between the leak oil line and fuel injectors (Y76/1, Y76/2, Y76/3, Y76/4) with a special lubricant.

Special antifriction agent

*BR00.45-Z-1055-06A

 Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running

Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

6

Check fuel system for leaks with engine running

 Carry out visual inspection.

7

Install trim panel of cylinder head cover

Number

Designation

Order number

BR00.45-Z-1055-06A

Special sliding compound

A 000 989 36 60