ar0703p9105a

Remove/install leak oil line to injectors

Type ar · emne 07.03 · version 0105 · 2010-11-12

Gælder for: ENGINES 642 in MODEL 164, 203, 204, 207, 209, 211, 212, 218, 219, 221, 251

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 07 Blandingstilberedning › 07.03 Indsprøjtningsdyser, indsprøjtningsventiler, ledninger — Serie 164 · Serie 203 · Serie 204 · Serie 207 · Serie 209 · Serie 211 · Serie 212 · Serie 218 · Serie 219 · Serie 221 · Serie 251

EinPAS 15 Motor › 15.45 Motorstyring › 15.45.13 ledning/slange/ventil — Serie 164 · Serie 203 · Serie 204 · Serie 207 · Serie 209 · Serie 211 · Serie 212 · Serie 218 · Serie 219 · Serie 221 · Serie 251

Gælder også for motorer/gearkasser: 642 ***

AR07.03-P-9105A

Remove/install leak oil line to injectors

27.10.10

ENGINES 642 in MODEL 164, 203, 204, 207, 209, 211, 212, 218, 219, 221, 251

Remove/install leak oil line to injectors

P07.03-2191-09

1 Retaining ring

2 Leak oil line

A Circlip correctly latched

B Circlip not correctly latched

Removing

Danger!

Risk of explosion from fuel igniting. Risk of injury to skin and eyes caused by fuel spraying out at high pressure

Keep all ignition sources out of hazard area.

Do not carry out any work on systems when they are under pressure

AS07.16-Z-0001-01A

Danger!

Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel and risk of injury to eyes and skin caused by contact with fuel

No fire, sparks, open flames or smoking.
Only pour fuels into suitable and appropriately marked containers.

Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

1

Pull circlip (1) upwards

2

Unlatch leak oil line (2) upwards

Checking

3

Check connection for leak oil line (2) on injector

Check O-ring for damage; replace if necessary

Install

4

Clip in leak oil line (2) on connection fitting for injector and latch circlip (1)

The leak oil line (2) must audibly clip in on connection fitting for injector and the circlip (1) press down all the way (arrow) in order to avoid the leak oil line (2) springing out.

Checking

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running

Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

5

Check leaktightness for a running engine

Visual inspection only.

Henviste dokumenter