P07.03-2184-06
1 Fuel rail
7 Clamp
13 Sealing ring
Arrow: Square catch
Y62 Fuel injection valves
| Remove/install | ||
Danger! | Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contact with fuel. | No fire, sparks, open flames or smoking. Wear protective clothing when handling fuel. | |
Danger! | Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | When moving components, ensure that no body parts or limbs are within the operating range of moving parts. | |
1 | Open the engine hood and raise it to vertical position | ||
2 | Remove fuel distributor rail (1) together with fuel injectors (Y62) | ||
3 | Detach clamps (7) from the fuel injection valves (Y62) and fuel distributor rail (1) | ||
4 | Remove fuel injection valves (Y62) from fuel distributor rail (1) | Check the sealing ring (13) for damage and replace if necessary. Otherwise, leaks may occur. | |
Installation: Ensure that the fuel injection valves (Y62) are seated correctly in the fuel distributor rail (1). | |||
Installation: The clamp (7) must get locked in the square catch (arrow) at the fuel injection valves (Y62). | |||
Installation: Moisten the sealing ring (13) with a little liquid lubricant before assembly. | |||
Lubricant | |||
5 | Install in the reverse order | ||
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near engine | Secure vehicle to prevent it from moving. | |
6 | Carry out engine test run and check fuel system for leaks | In the event of oil loss, determine and eliminate the cause; otherwise, there may be malfunctions and damage to the engine as well as the environment. |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1002-06A | Lubricating paste, rubber parts 2.5 kg, DB supply specification 6867.00 | A 000 989 01 60 |
Henviste dokumenter
- ar0703p1451rt
- ar8840p1000rt
- as0000z000501a Fare for ulykke ved automatisk igangsætning når motoren kører. Fare for personskade på grund af knusning og forbrænding, hvis der arbejdes mens motoren startes eller kører
- as0000z001101a Fare for personskade pga. fastklemning eller knusning af fingre ved af-, påmontering og indstillingsarbejde på motorhjelm og bagklap, døre, dæksler og soltag.
- as4700z000101a Fare for eksplosion ved tænding, fare for forgiftning ved indånding og indtagelse af brændstof samt fare for hud- og øjenskader ved kontakt med brændstof