ar0520s6992pb

Remove/install camshafts

Type ar · emne 05.20 · version 0100 · 2017-10-30

Gælder for: Engine 200 in model 470

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 05 Motorstyring › 05.20 Knastaksel, knastakselindstilling — Serie 470

EinPAS 15 Motor › 15.17 Motorstyring › 15.17.30 ventildrev — Serie 470

Gælder også for motorer/gearkasser: 200 ***

AR05.20-S-6992PB

Remove/install camshafts

04.10.2017

Engine

200 in model 470

Remove/install camshafts

S05.20-4545-08

1

Camshaft (intake)

A

Guide pin (camshaft intake)

2

Camshaft (exhaust)

B

Guide pin (camshaft exhaust)

Caution

Risk of injury to skin and eyes due to handling of engine oil. Risk of poisoning caused by swallowing engine oil

Wear protective gloves, protective clothing and safety glasses.
Do not fill engine oil into beverage containers.

AS18.00-Z-0001-01A

Remove/install

1

Remove camshaft positioner

AR05.20-S-7204PB


Never rotate crankshaft while camshafts (1, 2) are installed and timing chain is loosened or removed. The piston on cylinder 1 must be set to ignition TDC.
This prevents incorrectly adjusted timing and thus serious engine damage.

2

Remove rear cap on cylinder head

AR01.30-S-5702-01PB

3

Remove camshaft bearing caps

AR05.20-S-6992-04PB

4

Remove camshaft (1)

Installation:
Install camshaft (1) such that guide pin (A) is in the position shown.
This basic position prevents damage to the camshaft (1).

Installation: Lubricate camshaft (1) in the area of the bearing with suitable oil.

5

Remove camshaft (2)

Installation:
Install camshaft (2) such that guide pin (B) is in the position shown.
This basic position prevents damage to the camshaft (2).

Installation: Lubricate camshaft (2) in the area of the bearing with suitable oil.

Check

6

Check camshafts (1, 2) for wear

To do so, check height of cam and diameters of camshaft bearing journals.

Commercially available devices/tools
Outside micrometer

Bearing journal Ø

*BE05.20-N-1001-04PB

Cam height

*BE05.20-N-1002-04PB

Depending on findings

Replace respective worn camshaft (1, 2).

7

Install in the reverse order

Check values for camshaft

Number

Designation

Engine 200 in model 470

BE05.20-N-1001-04PB

Bearing journal Ø

with bearing cap marking

"1"

mm

27,935...27,955

"2", "3", "4", "5"

mm

23,435...23,455

"A", "B", "C", "D"

mm

23,435...23,455

Check values for camshaft

Number

Designation

Engine 200 in model 470

BE05.20-N-1002-04PB

Cam height

Intake camshaft

mm

45,865...46,055

Exhaust camshaft

mm

44,175...44,365

Henviste dokumenter