Removing and installing retaining lock for crankshaft/ring gear

Type ar · emne 03.30 · version 0101 · 2000-02-11

Gælder for: ENGINE 111.979 in MODEL 901.0, 902.0, 903.0, 904.0 ENGINE 111.984 in MODEL 901.6, 902.6, 903.6, 904.6

Ikke tilgængelig på “da”; vises på Engelsk.

AR03.30-D-5000C

14.2.96

ENGINE 111.979 in MODEL 901.0, 902.0, 903.0, 904.0

ENGINE 111.984 in MODEL 901.6, 902.6, 903.6, 904.6

D03.30-1000-05

1  Retaining lock

2 Starter

 	Removing, installing
1	Remove starter (2)		AR15.30-D-7100C
2	Insert retaining lock (1) through the starter opening into the starter ring gear	  Retaining lock (1) must be resting against the starter opening, crank engine slightly if necessary.	*602589004000
3	Install in the reverse order

602 589 00 40 00

Retaining lock