Removing and installing retaining lock for crankshaft/ring gear

Type ar · topic 03.30 · version 0101 · 2000-02-11

Applies to: ENGINE 111.979 in MODEL 901.0, 902.0, 903.0, 904.0 ENGINE 111.984 in MODEL 901.6, 902.6, 903.6, 904.6

Where it sits

Function group 1 Engine › 03 Crank assembly › 03.30 Flywheel, driving disc, vibration damper, starter ring gear — Series 901 (models 0**, 6**) · Series 902 (models 0**, 6**) · Series 903 (models 0**, 6**) · Series 904 (models 0**, 6**)

EinPAS 15 Engine › 15.15 Combustion engine, complete/engine housing/crank assembly › 15.15.41 Crankshaft/flywheel/drive plate — Series 901 (models 0**, 6**) · Series 902 (models 0**, 6**) · Series 903 (models 0**, 6**) · Series 904 (models 0**, 6**)

Also applies to engines/gearboxes: 111 979, 111 984

AR03.30-D-5000C

Removing and installing retaining lock for crankshaft/ring gear

14.2.96

ENGINE 111.979 in MODEL 901.0, 902.0, 903.0, 904.0

ENGINE 111.984 in MODEL 901.6, 902.6, 903.6, 904.6

D03.30-1000-05

1  Retaining lock

2 Starter

 	Removing, installing
1	Remove starter (2)		AR15.30-D-7100C
2	Insert retaining lock (1) through the starter opening into the starter ring gear	  Retaining lock (1) must be resting against the starter opening, crank engine slightly if necessary.	*602589004000
3	Install in the reverse order

602 589 00 40 00

Retaining lock