AR03.30-D-1600G | Remove/install belt pulley/vibration damper | 12.12.08 |
ENGINE 611.981 /987 in MODEL 901.6, 902.6, 903.6, 904.6
ENGINE 612.981 in MODEL 902.6, 903.6, 904.6, 905.6
ENGINE 611.983 in MODEL 690.6
D03.30-1101-05
1 Belt pulley/vibration damper
2 Center bolt
3 Washer
4 Woodruff key
| Remove/install | ||
1 | Remove poly-V belt | ||
2 | Install retaining lock for crankshaft/ring gear | ||
3 | Unscrew central bolt (2) together with washer (3) | | |
4 | Pull off belt pulley / vibration damper (1) | On firmly attached hub of belt pulley / vibration damper (1), detach carefully using a suitable puller. | |
Installation: Align woodruff key (4), if necessary fix with grease. Turn to ensure that the slot is aligned with the parallel key in the crankshaft. | |||
5 | Inspect hub at belt pulley / vibration damper (1) for wear grooves | If groove caused by wear can be felt in radial seal | |
Replace belt pulley with vibration damper. | |||
6 | Install in the reverse order | ||
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running | Secure vehicle to prevent it from moving by itself. | |
7 | Inspect for oil leaks | Run engine until warm, switch off and inspect for leaks. |
Flywheel, driven plate, vibration damper, starter ring gear
Henviste dokumenter
- ar0330d5000d
- ar1322d1202e
- as0000z000501a Fare for ulykke ved automatisk igangsætning når motoren kører. Fare for personskade på grund af knusning og forbrænding, hvis der arbejdes mens motoren startes eller kører