ar0320w3000j

Replace front crankshaft radial sealing ring

Type ar · emne 03.20 · version 0201 · 2010-12-06

Gælder for: ENGINES 900.9 in MODELS 375.1, 970, 972, 975, 976 ENGINES 902.9 in MODEL 375.3, 950.5 /6, 952.5 /6, 953.6, 954.5 ENGINES 902.9 in MODEL 957 except CODE (MS8) Natural gas engine ENGINES 902.9 in MODELS 375.1, 970, 972, 974, 975, 976 ENGINES 924.9 in MODELS 958.0, 970, 972, 974, 975, 976 ENGINES 925.9 in MODELS 970, 972, 974 ENGINES 926.9 in MODEL 958.0 ENGINES 926.9 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5, 957, 958.2

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 03 Drivværk › 03.20 Krumtapaksel — Serie 375 (modeller 1**, 3**) · Serie 900 (modeller 9**) · Serie 902 (modeller 9**) · Serie 950 (modeller 5**, 6**) · Serie 952 (modeller 5**, 6**) · Serie 953 (modeller 6**) · Serie 954 (modeller 5**) · Serie 957 · Serie 958 (modeller 0**, 2**) · Serie 970 · Serie 972 · Serie 974 · Serie 975 · Serie 976

EinPAS 15 Motor › 15.15 forbrændingsmotor komplet/motorblok/krumtapdrev › 15.15.41 Krumtapaksel/svinghjul/medbringerskive — Serie 375 (modeller 1**, 3**) · Serie 900 (modeller 9**) · Serie 902 (modeller 9**) · Serie 950 (modeller 5**, 6**) · Serie 952 (modeller 5**, 6**) · Serie 953 (modeller 6**) · Serie 954 (modeller 5**) · Serie 957 · Serie 958 (modeller 0**, 2**) · Serie 970 · Serie 972 · Serie 974 · Serie 975 · Serie 976

Gælder også for motorer/gearkasser: 924 9**, 925 9**, 926 9**

AR03.20-W-3000J

Replace front crankshaft radial sealing ring

23.11.10

ENGINES 900.9 in MODELS 375.1, 970, 972, 975, 976

ENGINES 902.9 in MODEL 375.3, 950.5 /6, 952.5 /6, 953.6, 954.5

ENGINES 902.9 in MODEL 957 except CODE (MS8) Natural gas engine

ENGINES 902.9 in MODELS 375.1, 970, 972, 974, 975, 976

ENGINES 924.9 in MODELS 958.0, 970, 972, 974, 975, 976

ENGINES 925.9 in MODELS 970, 972, 974

ENGINES 926.9 in MODEL 958.0

ENGINES 926.9 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5, 957, 958.2

Replace front crankshaft radial sealing ring

W03.20-1170-12

1 Radial shaft sealing ring

2 Crankshaft

Modification notes

24.8.09

Work procedure completely modified

Removing

1

Remove belt pulley/vibration damper

MODELS 375, 950, 952, 953, 954, 958, 970, 972, 974, 975, 976

AR03.30-W-1600J

Model 957

AR03.30-W-1600D

2

Remove radial shaft sealing ring (1)

AR03.20-W-3000-02RA

Checking

3

Check flange on the crankshaft (2) for galling of the radial shaft sealing ring (1)

If galling is found on the flange:

Replace crankshaft (2).

AR03.20-W-4351J

Install

4

Install new radial shaft sealing ring (1)

AR03.20-W-3000-01RA

*904589041500

5

Install belt pulley/vibration damper

MODELS 375, 950, 952, 953, 954, 958, 970, 972, 974, 975, 976

AR03.30-W-1600J

Model 957

AR03.30-W-1600D

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running

Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

6

Start engine and run it at varying speeds

7

Switch off engine and check around radial shaft sealing ring (1) for leaktightness

Visual inspection.

Replace front crankshaft radial sealing ring

Assembly tool

904 589 04 15 00

Henviste dokumenter