EinPAS 15 Motor › 15.15 forbrændingsmotor komplet/motorblok/krumtapdrev › 15.15.41 Krumtapaksel/svinghjul/medbringerskive — Serie 470 · Serie 471 · Serie 639 · Serie 906
Gælder også for motorer/gearkasser: 642 ***, 642 896, 642 898, 642 992, 642 993
AR03.20-S-4351-02SE
Tightening procedure for crankshaft bearing caps
Topical note
Notes on threaded connections fastened using a tightening angle-based tightening process
Modification note added regarding bolted connections with angle tightening process.
14.03.2018
Prescribed engine oils added.
Crankshaft
Number
Designation
Engine 642 in model 470, 471
BA03.20-N-1001-01PS
Bolt, crankshaft bearing cap to crankcase
Stage 1
Nm
35
Stage 2
°
95
Stage 3
°
95
Crankshaft
Number
Designation
Engine 642 in model 639
Engine 642 in model 906
BA03.20-N-1002-01J
Bolt, crankshaft bearing cap to crankcase
Stage 1
Nm
35
35
Stage 2
°
95
95
Stage 3
°
95
95
Crankshaft
Number
Designation
Engine 642 in model 470, 471
BA03.20-N-1002-01PS
Side bolt, crankcase to crankshaft bearing cap
M10
Stage 1
Nm
53
Stage 2
°
95
Crankshaft
Number
Designation
Engine 642 in model 639
Engine 642 in model 906
BA03.20-N-1003-01J
Side bolt, crankcase to crankshaft bearing cap
M10
Stage 1
Nm
53
53
Stage 2
°
95
95
1
Wet the bolts (1 to 16) for the crankshaft bearing caps (A, B, C, D) on the thread and bolt head contact surface with engine oil.
2
Tighten the bolts (1 to 16) for the crankshaft bearing caps (A, B, C, D) as per the tightening procedure. Model 639, 906 Model 470, 471 .
Note the tightening torque for the bolts (1 to 16).
3
Tighten the side bolts (1.1 to 8.1) for the crankcase on the crankshaft bearing caps (A, B, C, D) as per the tightening procedure. Model 639, 906 Model 470, 471 .
Note the tightening torque for the bolts (1.1 to 8.1).
4
Rotate the crankshaft and ensure that it can move unobstructed.
If there is a problem,
Remove the crankshaft bearing caps (A, B, C, D) one after the other and determine the cause.
