1 | Crankshaft gear |
2 | Radial shaft sealing ring |
P03.20-2357-05
| Remove/install | ||
1 | Remove toothed belt | ||
2 | Detach crankshaft gear (1) from the crankshaft | ||
3 | Remove radial shaft sealing ring (2) | Installation: Mount radial shaft sealing ring (2) with insertion tool flush in the timing case cover. Repair solution for galling at the belt pulley: hammer radial shaft sealing ring (2) in evenly 0.7 mm deeper. | |
Detach radial shaft sealing ring (2) with puller; do not damage crankshaft and mounting hole for the crankshaft radial shaft sealing ring (2) in the process. | |||
Adapter | |||
Puller | |||
Insertion tool | |||
4 | Install in the reverse order | ||
Danger ! | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
5 | Carry out engine test run and check engine for leaktightness while it is running |
607 589 02 43 00
Puller
607 589 00 43 00
Adapter
607 589 03 43 00
Insertion tool
Henviste dokumenter
- ar0500p7601ora
- as0000z000501a Fare for ulykke ved automatisk igangsætning når motoren kører. Fare for personskade på grund af knusning og forbrænding, hvis der arbejdes mens motoren startes eller kører