Remove/install oil pan

AR01.45-T-7500B

26.4.00

ENGINE 441.980 in MODEL 613.355 /364 /365

ENGINE 402.970, 446.938 in MODEL 613.455 /485

T01.45-0006-06

Shown on engine 402.970, 446.938

1 Dipstick guide tube

2 Oil pan

3 Oil filler neck

4 Turbocharger oil return pipe

5 Screw

T01.45-0007-02

2 Oil pan

6 Toothed lock washer

7 Dipstick guide hose

 	Removing, installing
1	Cover all attached parts remaining in vehicle (area to be repaired)		AR00.60-T-1000B
2	Detach lower engine compartment paneling	Model 613.355/455/485.	AR61.20-T-1105B
		Model 613.364/365.	AR61.20-T-1105C
3	Drain engine oil	 Oil drain plug	*BA01.45-N-1002-01G
	Engine - oil and filter change	Model 613.355/455/485.	AP18.00-T-0101A
	Engine - oil and filter change	Model 613.364/365.	AP18.00-T-0101B
4	Detach dipstick guide tube (1) from oil pan (2)
5	Detach oil filler neck (3)
6	Detach turbocharger oil return pipe (4) on both sides of the oil pan (2)	 Only engine 402.970, 446.938.
7	Unscrew bolts (5) and take off oil pan (2)	  Installation: Pay attention to tightening pattern: - First of all, tighten corner bolts diagonally across (A - B) and (C - D), - then tighten the remaining bolts in turn, starting from the corner bolt tightened last. - Re-tighten the corner bolts.	*BA01.45-N-1001-01G
8	Remove toothed lock washer (6) and take off dipstick guide hose (7)	 Only if oil pan (2) is replaced.
9	Take off gasket and clean sealing surface of oil pan and crankcase	 Installation: Install new gasket.
10	Install in the reverse order

 Oil pan