Preparation for turning liner collar seat

Type ar · emne 01.40 · version 0102 · 2006-07-25

Gælder for: ENGINE 441.980 in MODEL 613.355 /364 /365 ENGINE 402.970, 446.938 in MODEL 613.455 /485

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 01 Motor komplet, motorudluftning, topstykke, motorblok › 01.40 Motorblok, takthusdæksel, endedæksel — Serie 441 (modeller 980) · Serie 613 (modeller 355, 364, 365, 455, 485)

EinPAS 15 Motor › 15.15 forbrændingsmotor komplet/motorblok/krumtapdrev › 15.15.31 motorblok/olieudskiller/udluftning — Serie 441 (modeller 980) · Serie 613 (modeller 355, 364, 365, 455, 485)

Gælder også for motorer/gearkasser: 402 970, 446 938

AR01.40-T-9304-03B

Preparation for turning liner collar seat

Workshop equipment

WE58.40-Z-1005-21A

Liner collar seat turning tool

Preparation for turning liner collar seat

T01.40-0028-01

1 Clean cutting tool (1) and turning tool .
Lightly oil cutting tool (1) and the splines.

 When equipment is operated for the first time, remove blue protective paint on the magnetic ring (3) with thinner.

2 Pull quick-adjusting ring (2) in direction of crank and insert cutting tool (1).

 The centering roller (arrow) of the cutting tool must project on the side of the cutting tool mount marked with 'R'. Align cutting tool so that it is centered.