AR01.20-W-9750C | Remove/install oil separator | 23.2.06 |
ENGINE 457.9## ## up to 036947 in MODELS 375, 944
W01.20-1010-06
Illustrated on model 944
1 Oil separator
2 Bleed hose
3 Vent line
4 Seal
| Remove/install | ||
Danger! | Risk of injury caused by being caught or pinched as cab is tilted | Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure with the safety strut. | |
1 | Tilt cab | Installation: Tilt the cab back only after the leak test has been conducted | |
| Notes on tilting the cab | ||
2 | Remove soundproofing on frame at the upper left | ||
3 | Detach vent hose (2) at oil separator (1) and at vent line (3), push vent hose (2) onto the vent line (3) | Check vent hose (2) and vent line (3) for deposits; clean or replace as necessary. Check condition of hose clamps; replace if necessary. | |
4 | Remove oil separator (1) at timing case | Collect engine oil that flows out. | |
Installation: Replace seal (4) on oil separator (1). | |||
| |||
5 | Install in the reverse order | ||
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the running engine | Secure vehicle to prevent it from moving by itself. | |
6 | Start the engine and perform an engine test run | ||
7 | Switch off the engine (1) and check oil separator for leaks | Visual inspection. |
Crankcase ventilation, cylinder head cover
Henviste dokumenter
- ah6080n000301a Oplysninger om tipning af førerhus
- as0000z000501a Fare for ulykke ved automatisk igangsætning når motoren kører. Fare for personskade på grund af knusning og forbrænding, hvis der arbejdes mens motoren startes eller kører
- as6080z000101a Fare for personskade ved fastklemning og knusning, når førerhuset tippes