P01.20-2090-08
1 Tubing
2 Oil separator
3 Cable
2a Bolt
Modification notes
| Remove/install | ||
| Notes on self-locking nuts and bolts | ||
1 | Open engine hood and raise to vertical position | ||
2 | Remove air filter housing | ||
3 | Detach the hose (1) at the oil separator (2) | ||
4 | Unclip the line (3) from the bracket at the oil separator (2) | ||
5 | Unscrew bolts (2a) | Screw of oil separator to cylinder head cover | |
6 | Remove oil separator (2) | Intercept the engine oil that flows out with an absorbent rag. | |
7 | Install in the reverse order | ||
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near engine | Secure vehicle to prevent it from moving. | |
8 | Run engine and inspect for oil leaks | ||
9 | Correct the engine oil level |
Crankcase ventilation, cylinder head cover
Henviste dokumenter
- ah0000n000101a Oplysninger om selvlåsende bolte og møtrikker
- ar0910p1150va
- ar8840p1000v
- as0000z000501a Fare for ulykke ved automatisk igangsætning når motoren kører. Fare for personskade på grund af knusning og forbrænding, hvis der arbejdes mens motoren startes eller kører