P01.20-2091-05
1 Crankcase ventilation hose
2 Screw
3 Centrifuge cover
4 Clip
5 Battery cover
Modification notes
| Remove/install | ||
1 | Open engine hood | ||
2 | Untwist clip (4) and remove battery cover (5) | ||
3 | Pull out hose (1) for crankcase ventilation at cover (3) of centrifuge | ||
4 | Remove bolts (2) | | |
5 | Remove cover (3) of centrifuge | Intercept engine oil that flows out with an absorbent rag. | |
Installation: Inspect gasket and radial shaft seal in centrifuge cover (3) for wear or damage and replace centrifuge cover (3) if necessary. | |||
6 | Install in the reverse order | ||
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running | Secure vehicle to prevent it from moving by itself. | |
7 | Conduct engine test run and check engine for leaks |
Crankcase ventilation, cylinder head cover
Henviste dokumenter
- ar8840p1000v
- as0000z000501a Fare for ulykke ved automatisk igangsætning når motoren kører. Fare for personskade på grund af knusning og forbrænding, hvis der arbejdes mens motoren startes eller kører