Remove/install engine cover

AR01.10-D-2405TSM

Remove/install engine cover

12.12.2019

Engine

654.9 in model 907.1/2/6

1

Engine cover

2

Cap

2.1

Hose

 

Remove/install

1

Remove air filter housing.

AR09.10-D-1150TSM

2

Release cap (2) at locking element in direction of arrow (arrow A) and turn cap (2) in direction of arrow (arrow B) until end stop.

 Installation: Ensure that locking element has engaged correctly.

3

Remove cap (2) and place to side with hose (2.1).

4

Pull off engine cover (1) from ball heads (arrows C) in upward direction and remove.

 Installation: Wet elastomer bearings of engine cover (1) with lubricant.

Lubricant, rubber assembly 1 l

*BR00.45-Z-1010-06A

5

Seal openings using suitable protective covers.

 Set of protective covers

*001589019100

6

Check elastomer bearings of engine cover (1) for damage.

If damage is present:



Replace corresponding elastomer bearing of engine cover (1).

7

Install in the reverse order.



Check

 Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

8

Perform engine test run and check engine in area of cap (2) for leaks.

Repair materials

Number

Designation

Order number

BR00.45-Z-1010-06A

Lubricant, rubber assembly 1 l

A 000 989 03 67