Crank engine with starter

AR01.10-D-0110R

Crank engine with starter

11.09.2013

ENGINE

646 in MODEL 909

01

Compression recorder

02

Contact switch

Y74

Pressure regulator valve

 Danger !

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

 Danger !

Risk of death. Death may occur if body parts are drawn into rotating vehicle parts.

Do not reach into rotating parts. Wear closed and snug-fitting work clothes. Secure area of rotating vehicle components against unauthorized access.

AS00.00-Z-0004-01A

Connecting

1

Switch off ignition

 Turn transmitter key into position 0.

2

Remove trim panel of cylinder head cover

AR01.20-D-5014-02R

 Bolt, trim panel to cylinder head cover

*BA01.20-N-1003-01M

3

Disconnect electrical connection at pressure regulating valve (Y74)

4

Connect up compression recorder (01)

AR01.10-D-0010-01R

 Electrical connection kit

*220589009900

 Compression tester

*001589762100

5

Crank engine by pressing contact switch (02) at compression recorder (01)

 Do not start engine.

 Electrical connection kit

*220589009900

 Compression tester

*001589762100

6

Disconnect in reverse order

7

Connect STAR DIAGNOSIS and read out fault memory



AD00.00-D-2000-04F

8

Install in the reverse order

 Crankcase ventilation, cylinder head cover

Number

Designation

ENGINE 646 in MODEL 909

BA01.20-N-1003-01M

Bolt, trim panel to cylinder head cover

Nm

10