ar0120d501402r
Remove/install cylinder head cover trim
Type ar · emne 01.20 · version 0101 · 2013-09-06
Gælder for: ENGINE 646 in MODEL 909
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 1 Motor › 01 Motor komplet, motorudluftning, topstykke, motorblok › 01.20 Motorudluftning, ventildæksel — Serie 646 · Serie 909
EinPAS 15 Motor › 15.15 forbrændingsmotor komplet/motorblok/krumtapdrev › 15.15.45 afdækning/beklædning — Serie 646 · Serie 909
AR01.20-D-5014-02R
| Remove/install cylinder head cover trim
|
|
|
Crankcase ventilation, cylinder head cover
|
Number
| Designation
|
| ENGINE 646 in MODEL 909
|
BA01.20-N-1003-01M
| Bolt, trim panel to cylinder head cover
| Nm
| 10
|
1
| Remove screw/bolts (3) for cylinder head cover trim panel (1).
|
|
| Installation: Observe official torque specifications.
|
2
| Remove cylinder head cover trim panel (1) from cylinder head cover.
|
|
| Installation: Ensure that the insulation between the cylinder head cover trim panel (1) and cylinder head cover is seated correctly.
|
3
| Install in the reverse order.
|
