ap8330a8312a

Air conditioning system - check refrigerant level

Type ap · emne 83.30 · version 0102 · 2006-12-21

Gælder for: MODEL 690.340 /341 /630 /631 /640 /641, 903.661 /662 /663 /671 /672 /673, 904.663 with CODE (HH6) Air conditioning, roof equipment MODEL 904.662 /663 with CODE (HK1) Regulated air conditioning, roof equipment

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 83 Klimatisering › 83.30 Klimaanlæg — Serie 690 (modeller 340, 341, 630, 631, 640, 641) · Serie 903 (modeller 661, 662, 663, 671, 672, 673) · Serie 904 (modeller 662, 663)

EinPAS 39 Varmesystem/ventilation/køling › 39.15 Klimatisering › 39.15.5 Klimaanlæg komplet — Serie 690 (modeller 340, 341, 630, 631, 640, 641) · Serie 903 (modeller 661, 662, 663, 671, 672, 673) · Serie 904 (modeller 662, 663)

AP83.30-A-8312A

Air conditioning system - check refrigerant level

12.12.06

MODEL 690.340 /341 /630 /631 /640 /641, 903.661 /662 /663 /671 /672 /673, 904.663 with CODE (HH6) Air conditioning, roof equipment

MODEL 904.662 /663 with CODE (HK1) Regulated air conditioning, roof equipment

Air conditioning system - check refrigerant level

A83.50-0016-12

1 Condenser unit

2 Inspection glass

Removing

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running

Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

Danger!

Risk of death caused by falling from vehicle roof. Risk of injury to other persons caused by falling objects during work in roof area.

AS65.00-Z-0002-01A

1

Remove cover on condenser unit (1)

AR83.50-A-5000B

Checking

2

Start engine and allow to idle

3

Switch on air conditioning

4

Check refrigerant flow in inspection glass (2)

The refrigerant must flow bubble-free through the inspection glass (2). After the air conditioning is refilled completely, wait for approx. 10 min before checking the refrigerant flow in the inspection glass (2). Ambient temperatures > 35 °C can result in foaming or slight bubble formation in the inspection glass.

In the case of bubble formation and suspected refrigerant loss:

Determine and eliminate cause

- subject to separate repair order.

5

Switch off air conditioning and switch off engine

Install

6

Fit cover on condenser unit (1)

AR83.50-A-5000B

Henviste dokumenter