Remove/fit rear wheels · ap4010d4040a · Mercedes-Benz WIS

AP40.10-D-4040A

Remove/fit rear wheels

23.8.11

MODEL 903.6, 904.6, 905.6
as of model year 2003

MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

N40.10-2177-01

1 Attaching lug nut

2 Spherical spring washer

3 Disk wheels

	Remove/install
	Notes on lug bolts		AH40.10-N-1005-01A
1	Secure vehicle against rolling
2	Raise vehicle and support using jack stand	 The vehicle frame may be damaged if the jack stands are not attached correctly.
		 Position jack stands on longitudinal frame member upstream of the rear axle.
3	Remove wheels	 Installation: Tighten attaching lug nut (1) diagonally.
		 Installation: The attaching lug nuts (1) must be re-tightened after the first 50 km.
			*BA40.10-N-1001-01A
	Checking
4	Check tires for signs of damage and make sure that they are in good condition	 If necessary, replace tires.
5	Inspect condition of disk wheels (3), look for signs of damage, and check rim flanges are properly centered	 If necessary, replace disk wheels (3).
6	Check attaching lug nuts (1) and spherical spring washer (2) for damage	 If necessary, replace attaching lug nuts (1) and spherical spring washer (2).
7	Install in the reverse order

 Wheels

Number	Designation		Model 690.6, 901, 902, 903, 904, 905	Model WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD6, XD7, YD1, YD2, YD3, YD6, YD7	Model XD4, XD5, XD8, YD5, YD8, YD9, XD9, YD4


BA40.10-N-1001-01A	Wheel bolt or wheel nut	Nm	190 (+20)	240 (+10)	190 (+20)