ap3530t3560a

Rear axle - adjusting adjustment screw with sliding block

Type ap · emne 35.30 · version 0102 · 2005-07-12

Gælder for: REAR AXLE 745.861 in MODEL 613.355 REAR AXLE 745.862 in MODEL 613.455 /485 REAR AXLE 745.997 in MODEL 613.358 /388

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 35 Bagaksel › 35.30 Drev, drivaksler — Serie 613 (modeller 355, 358, 388, 455, 485)

EinPAS 17 Drivstreng/aksel › 17.51 Bagaksel › 17.51.30 Bagaksel komplet — Serie 613 (modeller 355, 358, 388, 455, 485)

EinPAS 17 Drivstreng/aksel › 17.52 Ekstra aksel › 17.52.30 ekstra aksel komplet — Serie 613 (modeller 355, 358, 388, 455, 485)

Gælder også for motorer/gearkasser: 745 861, 745 862, 745 997

AP35.30-T-3560A

Rear axle - adjusting adjustment screw with sliding block

22.10.98

REAR AXLE 745.861 in MODEL 613.355

REAR AXLE 745.862 in MODEL 613.455 /485

REAR AXLE 745.997 in MODEL 613.358 /388

Rear axle - adjusting adjustment screw with sliding block
Rear axle - adjusting adjustment screw with sliding block
Rear axle - adjusting adjustment screw with sliding block

T35.30-0005-01

T35.30-0004-01

T35.30-0003-01

1 Adjusting bolt

2 Counternut

Adjustment screw with slot

1 Adjusting bolt

2 Counternut

3 Sliding block

Adjustment screw with hexagon socket

1 Adjusting bolt

2 Counternut

3 Sliding block

Setting

1

Slacken and hold locknut (2)

2

Screw in adjustment screw (1) until the sliding block (3) touches the crown wheel

3

Set gap by unscrewing adjusting screw (1)

1/8 revolution.

4

Tighten locknut (2)

Hold adjusting screw (1) while doing this.