ap3225p3271gy

Shock absorber: Check for firm seating, retighten

Type ap · emne 32.25 · version 0102 · 2009-09-29

Gælder for: MODEL 461.332 /333 /334 with CODE (ZS4) Special protection version FB4 with CODE (ZS6) Special protection version FB6 with CODE (ZS7) Special protection version FB7 on front axle

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 32 Affjedring › 32.25 Støddæmpere, dæmperben, fjederben — Serie 461 (modeller 332, 333, 334)

EinPAS 20 Undervogn › 20.16 affjedring › 20.16.30 fjeder/fjederbælg/støddæmper/fjederben — Serie 461 (modeller 332, 333, 334)

AP32.25-P-3271GY

Shock absorber: Check for firm seating, retighten

24.9.09

MODEL 461.332 /333 /334
with CODE (ZS4) Special protection version FB4
with CODE (ZS6) Special protection version FB6
with CODE (ZS7) Special protection version FB7
on front axle

Shock absorber: Check for firm seating, retighten

P49.00-2108-01

Shown on left

1 Cover panel

Shock absorber: Check for firm seating, retighten

P32.25-2190-11

4 Supports

5 Shock absorber brackets

Shock absorber: Check for firm seating, retighten

P32.25-2189-01

3 Shock absorber

5 Shock absorber brackets

6 Screw

7 Shims

8 Nut

Removing

Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer.

AS00.00-Z-0010-01A

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

1

Raise vehicle

Lift/jack up vehicle

AR00.60-P-1000G

2

Remove front wheels

AP40.10-P-4050G

3

Remove left and right wheel housing trim

4

Remove left and right cover panel (1)

Checking

5

Carry out visual inspection of shims (7)

Check that shims (7) are present and in correct position.

6

Check shock absorber brackets (5) and mounts (4) for crack formation

Visual inspection only. If cracks are visible in the shock absorber brackets (5) or in the mounts (4):

Replace front left shock absorber bracket:

Model 461.332 / 334

AR61.10-P-0024A

Model 461.333

Replace front right front shock absorber bracket:

Model 461.332 / 334

AR61.10-P-0027A

Model 461.333

7

Retighten bolt (6) on left and right

*BA32.25-P-1002-01D

Install

8

Install left and right cover panel (1)

9

Install left and right wheel housing trim

10

Fit front wheels

AP40.10-P-4050G

11

Lower vehicle

Shock absorber

Number

Designation

Model
460, 461, 463

BA32.25-P-1002-01D

Bolt, shock absorber to frame

Outside diameter of bushing 21 mm

M16x1,5

Nm

130

Outside diameter of bushing 22 mm

M16x1,5

Nm

170

See picture

-

Henviste dokumenter