ap1800b0101c

Engine oil and oil filter change

Type ap · emne 18.00 · version 0101 · 2017-09-27

Gælder for: Engine 475 in model 382.070/073/081/087 Engine 476 in model 382.083/084/085

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 18 Motorsmøring, motoroliekøling › 18.00 Generelt — Serie 382 (modeller 070, 073, 081, 083, 084, 085, 087)

EinPAS 15 Motor › 15.20 Motorsmøresystem › 15.20.5 motorsmøring komplet — Serie 382 (modeller 070, 073, 081, 083, 084, 085, 087)

Gælder også for motorer/gearkasser: 475 ***, 476 ***

AP18.00-B-0101C

Engine oil and oil filter change

19.09.2017

Engine

475 in model 382.070/073/081/087

Engine

476 in model 382.083/084/085

Engine oil and oil filter change
Engine oil and oil filter change

B18.00-0024-01

1

Dipstick

2

Fueling nozzle

1

Dipstick

2

Fueling nozzle

B18.00-0031-01

Engine oil and oil filter change

3

Carter plug

B18.00-0019-01

1

Drain the engine oil through the oil pan plug (3)

Only drain the engine oil with heated engine at the work temperature.

Replace the sealing ring of the drain plug (3).

Crankcase drain plug

*BA01.45-B-1002-01C

2

Tilt the engine hood

AR88.40-B-1000B

3

Open the rear cover

Refer to the body makers instructions.

4

Replace the engine oil filter element

AP18.20-B-0100-04D

5

Fill crankcase through the filler neck (2) until the maximum oil level is reached on dipstick (1)

Engines 475, 476Engine oil

*BF18.00-B-1001-01C

Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

6

Run the engine at idle speed observing the oil pressure indicator

Do not accelerate the engine until oil pressure is shown on the indicator. The pressure will have to be re-established in approximately 10 seconds, otherwise stop the engine and check the cause of the low pressure.

Do not start the vehicle continuously more than 10 seconds. If the engine does not fire within this interval, wait approximately 30 seconds and operate it again.

Check the oil filter and the oil pan plug for tightness.

7

Stop the engine

8

Control the lubricant oil level for 5 minutes after having stopped the engine

If necessary, reestablish the level, use oil of the same brand and type already existent, until reaching the maximum level.

The oil level should be checked with the vehicle parked on level ground.

Under no hypothesis, the oil level must exceed the maximum reference level in the dipstick (1).

Oil pan

Number

Designation

Engine 475.9; 476.9

BA01.45-B-1002-01C

Crankcase drain plug

M16x1.5

Nm

80

Filling volume for engine lubrication

Number

Designation

Engine 475.9,

Engine 476.9 up to FZ...751716 (trucks), Engine 476.9 (buses)

BF18.00-B-1001-01C

Engine oil

Check the correct level

Oil pan

Litros

22

26

Henviste dokumenter