T00.00-0002-01
Bus
O 350
Inspection
Chassis no.: _________________________ Order number:_________________________ Total distance (km) __________________ Motor vehicle license: ____________________ Date: _____________ Confirm carrying out the work by signature. Mechanic: _____________________________________ |
Check by Customer service adviser | Condition on receipt OK NOT OK | ||
| Check vehicle for damage to paintwork, corrosion and accident damage | | |
| Date of tachograph inspection | | |
| Due date of main inspection (HU) | | |
| Due date of safety inspection (SP) | | |
| Due date of exhaust emissions inspection (AU) | | |
| Read out fault memory | | |
Inspection | completed | ||
Check and correct fluid level | Ensure leaktightness. In the event of a fluid loss which is not due to consumption, determine cause and eliminate subject to separate repair order. | ||
| Engine | | |
| Manual transmission | | |
| Air conditioning: Check refrigerant level | Konvekta air conditioning with roof heater and timer code HA4 | |
Konvekta ACX 640 air conditioning with roof heater code HKD | |||
Webasto Top 2002 Aerosphere air conditioning with roof heater code HKF | |||
| Retarder | | |
| Power steering | | |
| Rear axle | | |
Check for leaks and check condition | Pay attention to chafing marks and routing. | ||
| Check all lines, hoses and sensor cables | | |
Engine: | |||
| Inspect poly V-belt for wear and damage | | |
| V-belt: Check condition and retension if necessary | Fan belt drive. | |
| Retighten all charge air hose clamps between turbocharger and charge air cooler to specified torque | | |
| Align engine mount | | |
Check nuts and bolts for firm seating | Tighten if necessary. | ||
| Chassis and body: - Engine mount on substructure, propeller shaft flanges - Steering idler arm bearing brackets, end crossmember on substructure, trailer hitch Front axle: - Control arm attachments, control arm plate, supporting strut levers - Supporting struts, shock absorber mounts, shock absorbers, stabilizer bar Rear axle - Control arm attachments on substructure, stabilizer bar | | |
Tighten screws and nuts | Observe official torque specifications. | ||
| Chassis and body: Rear axle - Trailing arm to spring support | | |
| Spring bracket on spring support | Only on model 613.358/388 with rear axle 746.217 | |
| Wheels | | |
Final inspection | |||
| Test drive or test stand | Pay attention road safety. Check brakes, steering, tires, illumination, signaling system. | |
Mercedes-Benz Türk AŞ | After Sales Service M-AST | Satış Sonrası Hizmetleri M-AST |