AD80.35-S-6002-03A | RFL test of electrical system immobilizer indicator lamp actuation |
| Scope of test | Measuring instrument/ | Operation/Requirement | Specified value | Possible cause/remedy | ||
1.0 | Immobilizer monitoring lamp Actuation (CAN only) |
| Ignition: OFF Actuations: Switch monitoring lamp ON/OFF | Monitoring lamp illuminates or extinguishes | Monitoring lamp 1.1 Value O.K.: Erase fault memory and perform operational checking | ||
1.1 | Immobilizer monitoring lamp - (CAN and PWM) |
|
| A25.1 4 | Ignition: OFF Coupling on RFL control module, connector 2 (white) on instrument cluster and, if present, connector 1 on the pre-glow relay disconnected. | >20 kΩ | Cable Value O.K.: 1.2 |
1.2 | Immobilizer monitoring lamp + (CAN and PWM) |
|
| A25.1 4 | Ignition: OFF Coupling on RFL control module, connector 2 (white) on instrument cluster and, if present, connector 1 on the pre-glow relay disconnected. | <1 V | Cable Value O.K.: 1.3 |
1.3 | Immobilizer monitoring lamp -//- (CAN and PWM) |
|
| A25.1 4 | Ignition: OFF Coupling on RFL control module, connector 1 on pre-glow relay disconnected. Connector 2 (white) on instrument cluster re-connected. | <25 Ω | Cable RFL control module Value O.K.: |