ad4245p5001a

Electronic stability program (ESP) and SPS diagnosis troubleshooting

Type ad · emne 42.45 · version 0100 · 2003-06-10

Gælder for: MODEL 129 with ENGINE 104, 119, 120 with CODE (472a) electronic stability program (ESP) MODEL 140 with CODE (472a) electronic stability program (ESP) MODEL 210 with ENGINE 119 with CODE (472a) electronic stability program (ESP)

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 42 Bremsehydraulik og -mekanik › 42.45 Elektronisk stabilitetsprogram (ESP), stabilitetsregulering (SR) — Serie 129 · Serie 140 · Serie 210

Gælder også for motorer/gearkasser: 104 ***, 119 ***, 120 ***

AD42.45-P-5001A

Electronic stability program (ESP) and SPS diagnosis troubleshooting

12.8.97

MODEL 129 with ENGINE 104, 119, 120 with CODE (472a) electronic stability program (ESP)

MODEL 140 with CODE (472a) electronic stability program (ESP)

MODEL 210 with ENGINE 119 with CODE (472a) electronic stability program (ESP)

Electronic stability program (ESP) and SPS diagnosis, basic knowledge

AD42.45-P-2001A

Troubleshooting

Complaint

Possible cause

Notes

Remedy/Test steps

ESP MIL (A1e42) or ABS MIL (A1e17) illuminated when engine is running

AD42.45-P-4001A

EPC MIL (E-gas, A1e43) illuminated when engine running

Electronic accelerator (EA) faulty

Read out ME-SFI fault memory

ESP MIL (A1e42) or ABS MIL (A1e17) comes on while driving and does not go out again

AD42.45-P-4001A

ESP MIL (A1e42) or ABS MIL (A1e17) comes on while driving and goes out again

On-board voltage < 11 V, too many electrical consumers in operation

Test generator (G2)

AD42.45-P-4001A

ESP MIL (A1e42) or ABS MIL (A1e17) not illuminated when ignition switched on

AD42.45-P-6001-02A

ABS MIL (A1e17) illuminated when engine is running after tests on brake test bench or roller dynamometer

Implausible speed signal due to different speeds at front and rear axle

AD42.45-P-4001A

Henviste dokumenter